Sort by
Refine Your Search
-
Listed
-
Category
-
Country
-
Program
-
Employer
- SINGAPORE INSTITUTE OF TECHNOLOGY (SIT)
- University of Sheffield
- Pennsylvania State University
- Aalborg Universitet
- Center for Devices and Radiological Health (CDRH)
- City University of Hong Kong
- Fraunhofer-Gesellschaft
- NIST
- NTNU - Norwegian University of Science and Technology
- NTNU Norwegian University of Science and Technology
- Nature Careers
- University of Bristol
- University of Maryland, Baltimore
- University of Oxford
- ;
- Aalborg University
- Aridditive
- Empa
- European Space Agency
- INESC TEC
- KAUST
- MOHAMMED VI POLYTECHNIC UNIVERSITY
- Oak Ridge National Laboratory
- Rutgers University
- Singapore-MIT Alliance for Research and Technology
- Technical University of Denmark
- Texas A&M University
- The Ohio State University
- University of Dayton
- University of Miami
- University of Minnesota
- University of North Texas at Dallas
- University of Nottingham
- University of Oxford;
- University of Texas at Arlington
- 25 more »
- « less
-
Field
-
discrete dislocation plasticity modelling of metals and a good knowledge of dislocation plasticity and solid mechanics. Fortran coding experience and knowledge of Abaqus, Fortran user subroutines and crystal
-
knowledge of the mechanics of composites and a proven ability of advanced finite element analysis for commercial FEA packages (e.g. Abaqus Standard/Explicit, LS-Dyna), ideally with experience of through
-
fracture in composites with a sufficient degree of accurateness in terms of energy release rates and stress intensity factors. ABAQUS and XFEM MATLAB programs are available for the analyses. Extension
-
: Applications accepted all year round Details In analyses of failure in composite laminates, extended finite element analyses using Abaqus (or Ansys) might prove convenient for the prediction of transversal
-
. NIST has access to multiple modeling software options (e.g. ABAQUS, ANSYS, COMSOL), as well as large computational clusters. This opportunity focuses on applying or developing models of fracture and
-
to the Phase-field research and growing knowledge by: (1) using already developed codes to assess pros and cons of Phase-field in interesting benchmark problems. The subroutines -already tested for Abaqus- will
-
of the preferred qualifications, the ideal candidate will bring many of the following: -- Two or more years of experience using SolidWorks, including drawing generation. -- One year of experience using Abaqus, Ansys
-
morphing-wing UAV prototypes. Methodology: Design and Simulation: ABAQUS, SolidWorks, ANSYS, or COMSOL for topology optimization and aerodynamic modeling. Fabrication: Composite layup, 3D printing (FDM/SLA
-
, sintering of SiC-based ceramics, microstructural and mechanical characterization, programming of machines, modeling and simulation with Ansys, Abaqus, Comsol or similar software. The experimental nature
-
testing facility, supported by powerful materials modeling expertise and capabilities (ABAQUS and COMSOL). The link between microstructure and properties will be established through the NIST Precision