-
), operando sensing, and ageing tests will be conducted at UoB. At BAM, detailed post-mortem characterisation—including SEM, XPS, ToF-SIMS, Auger, and calorimetry—will reconstruct SEI composition, porosity, and
-
university campus and SPECIFIC Pilot Manufacturing Resource Centre (PMRC). On the Bay Campus, small device manufacture, device characterisation and material characterisation (including DSC, rheometry, SEM, TGA
-
manufactured using plasma spray and mini-combustion flame spray and examined in SEM/EBSD and tested in a burner rig and furnace thermal cycling. As a part of a CDT cohort, you will have access to tailored
-
the sustainability of the aerospace industry. The coatings will be manufactured using plasma spray and mini-combustion flame spray and examined in SEM/EBSD and tested in a burner rig and furnace thermal cycling. As a
-
metascintillator prototypes towards clinical application. The research will combine experimental surface engineering, advanced materials characterisation (SEM, XRD, spectroscopy), and performance testing alongside
-
prehistoric explosive eruptions, such as St Vincent, Dominica and Montserrat. Use standard petrological analysis, together with Scanning Electron Microscopy (SEM)and Electron Backscatter Diffraction (EBSD
-
ways, mechanical properties test (such as tensile test, etc.) and some highly advanced microstructural characterisation such as SEM (Scanning electron microscope), XRD (X-ray diffraction) and TEM
-
. The resulting dataset will be analysed using Structural Equation Modelling (SEM) to quantify the relationships between these factors and uncover both direct and indirect pathways affecting behaviours
-
; EPSRC Centre for Doctoral Training in Green Industrial Futures | Bath, England | United Kingdom | 3 months ago
(MS) to study reaction and drying kinetics. X-ray Diffraction (XRD) for crystalline phase identification. Scanning Electron Microscopy (SEM-EDX) for microstructural and elemental analysis. Numerical and
-
the admission application is approved. Cutting-Edge Training: Gain hands-on experience with multi-material 4D printing, advanced electrode fabrication, and state-of-the-art characterisation (e.g., SEM, TEM, XPS