Sort by
Refine Your Search
-
Listed
-
Category
-
Country
-
Employer
- SINGAPORE INSTITUTE OF TECHNOLOGY (SIT)
- Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial
- Johns Hopkins University
- University of Stavanger
- FEUP
- Hong Kong Polytechnic University
- Instituto de Engenharia Mecânica
- King Abdullah University of Science and Technology
- NTNU - Norwegian University of Science and Technology
- NTNU Norwegian University of Science and Technology
- UCL;
- Universidade de Coimbra
- University College London
- University of Arkansas
- University of Bergen
- University of Nottingham
- University of Southern Denmark
- Université Gustave Eiffel
- Vrije Universiteit Brussel
- 9 more »
- « less
-
Field
-
conventional simulators. Finite element-based methods such as Mixed-Finite-Element or Control-Volume methods are convenient thanks to their suitability for complex unstructured grids. Applications are sought
-
acquisition, instrumentation and monitoring during laboratory testing Perform numerical modelling and simulation, such as finite element modelling, parametric studies, and calibration against test data. Analyse
-
: This PREP position focuses on developing traceable on-wafer standards for 5G, 6G, and beyond. The position requires finite element simulations, programming, network analysis, dimensional metrology, web-based
-
-destructive testing (NDT) techniques for structural materials is desirable. Experience with structural modelling and analysis tools (e.g., finite element modelling, structural simulation) is desirable. Good
-
MATLAB (with proven experience – 5 points; no experience – 0 points); c) Relevant experience and solid knowledge of computational modeling and simulation tools with finite elements, especially ABAQUS (with
-
with morphological image data is essential. Experience in geometric morphometrics and/or finite element analysis is desirable. Customer advert reference: B02-10342
-
. Particular emphasis will be placed on characterizing defect populations and incorporating this information into finite element models, either through direct reconstruction of microstructures or statistically
-
placed on characterizing defect populations and incorporating this information into finite element models, either through direct reconstruction of microstructures or statistically generated synthetic
-
testing Perform numerical modelling and simulation, such as finite element modelling, parametric studies, and calibration against test data. Analyse experimental and numerical results, and prepare technical
-
structural modelling and analysis tools (e.g., finite element modelling, structural simulation) is desirable. Good interpersonal, written and verbal communication skills, with the ability to work independently